Toby Brook

When a customer asks us how they can check the performance of their ultrasonic tank, the easiest way to do it is through a foil test. It is really easy to do and all you need is a piece of […]

If you are undertaking a new project that requires parts to be ultrasonically cleaned, a question you may ask is: Should we undertake the cleaning ourselves or outsource it? To decide which option is better for your business, there are […]

Here at Sonic Solutions, we pride ourselves in being experts in industrial cleaning.  With a combined experience of nearly 30 years, we have seen hundreds of different items and contaminants from many different industries. Even with all this experience however, […]

When we receive an enquiry for cleaning parts, a question we get asked a lot is “How clean will it be when we get it back?” The simple answer to this is: “How clean does it need to be?” With […]

Ultrasonic cleaning and media blasting are two very different cleaning methods, though can be used for similar applications. Here at Sonic Solutions, we specialise in ultrasonic cleaning, but we do have a wet media blaster that can aid in some […]

One contaminant we get asked about a lot is rust. We often find customers reaching out to us with parts that have been improperly stored or forgotten about and when it comes time to use them, they discover they are […]

With our ultrasonic cleaning business, we occasionally get asked if we can bring our tanks on-site and perform the clean on the customer’s premises. This usually happens when a customer cannot afford the downtime of their parts being away from […]

The answer to this question varies from manufacturer to manufacturer. Some suppliers like to offer a neat, premixed solution that can be used to fill the tank and is ready to go. This work alright for smaller tanks of say, […]

When a customer purchases their own ultrasonic tank, one of the main questions they ask us is “how will I know when the cleaning solution needs replacing?” The short answer is: when it stops cleaning. This all depends on your […]

In many businesses, cleaning is not given much thought, until the item becomes too dirty to work effectively. At this point, the part can either be replaced with a new one or cleaned. This cleaning, if done properly, will prolong […]

How close to God are you?!  An introduction to Cleanliness Standards. We are in the business of cleaning and a common question we get asked is “how clean we can get their parts.” Wrong question! The question we need to […]

In short, we do use water, but it’s mixed with a cleaning agent. How much so is dependant upon the item you’re cleaning and the contaminant you’re removing. Different ultrasonic cleaning chemical manufacturers give their own guidelines on what concentrations […]

Whilst we’re not always asked this directly, some of you may be wondering “Why does ultrasonic cleaning cost so much, don’t you just put it in the tank and leave it?” so we thought we’d shed some light on the […]

We’re often asked how we send items back to a customer once they’ve been cleaned by us… How we ship your item back depends on the size, weight, and how it is packaged. We generally ship items back in the […]

Is ultrasonic cleaning right for the job? This is the first thing to consider when looking into getting your own ultrasonic cleaning tank. Here at Sonic Solutions, we champion ultrasonic cleaning as one of the best deep cleans available. This, however, […]

This article looks at the 10 key considerations we make when running a successful ultrasonic heat exchanger clean. What’s it used for? Heat exchangers, intercoolers and radiators, whatever people like to call them, they kind of do the same thing. […]

Discover 5 alternatives to Ultrasonic Cleaning. What they are? How do they work? What do they clean? What are the Pros & Cons?

Cleaning is expensive… Actually, when you consider the alternatives you’ll soon start to see the reality is not so. This 3-minute read could be the difference between making a loss or a profit in your business this year.

For us to give you the most accurate quote possible for our ultrasonic cleaning service, we need as much information about your items as you can give. This checklist will help you put together all the necessary information that we […]

How you decide when to change the cleaning solution in your ultrasonic bath. We look at various techniques and approaches to help you decide what is best for your cleaning.

We recently went to an event in Stuttgart Germany called Parts 2 Clean and it was a melting pot of innovation and creativity in the cleaning world. we learnt some fantastic new ways to clean industrial parts that we want to share with you. It’s a 5-minute read that might just change your business forever.